Introduction
Every stage within the paint application universe has unique equipment to fulfil its purpose. Some specialise in moving or mixing paint; others are better suited to applying paint, sealant and adhesives.
Therefore, experience and expertise are essential when choosing a supplier that understands this equipment. Graco equipment for manufacturing covers several of these requirements. Its range includes spray equipment, pumps, proportioning systems, dispensing equipment and automatic lubrication systems.
Most Indian manufacturers look for a well-rounded approach where installation, integration and maintenance are well taken care of. Patvin has worked with Graco since 1996 and supplies Graco equipment along with system integration, service, AMC and spare parts support in India.
Graco’s Product Range at a Glance
Application | Graco equipment | Typical use |
Paint application | Airless, air-assisted and automatic spray equipment | Industrial and automotive painting |
Paint mixing | ProMix proportioners | Two-component coatings |
Paint automation | Automatic spray guns | Automated and robotic painting |
Sealant and adhesive dispensing | Pumps, valves and metering systems | Bonding and sealing |
Lubrication | Pumps, injectors, controllers and divider valves | Automatic machine lubrication |
Maintenance | Original spare parts and service | Equipment upkeep |
Patvin has been a trusted supplier for Graco equipment, supplying spray guns, ProMix systems and other paint application equipment. Patvin’s capabilities also cover paint circulation, sealant systems, lubrication and robotic applications.
To explore Patvin’s full range of paint application systems and sealant dispensing solutions, visit our capabilities overview.
Spray Painting and Paint Mixing Systems
Paint application depends on controlled pressure, flow and atomisation. A change in any of these can affect the final finish.
Graco offers different spray technologies for different coating requirements.
Airless spraying
Graco’s airless sprayers atomise paint using high fluid pressure without compressed air at the nozzle. They work well for applications that require high material output, including many protective coating jobs.
Air-assisted spraying
Air-assisted systems combine fluid pressure with air to control atomisation and the spray pattern. They can be used where finish quality and application control are important.
Automatic spray equipment
Automatic spray guns are ideally used for integration into fixed lines or robotic applications. They allow manufacturers to repeat the same spray process across production cycles. Patvin supplies Graco manual and automatic spray guns for industrial applications.
When selecting spray equipment for your manufacturing process in India, manufacturers should consider the coating type and application requirements. Paint viscosity, required output, finish and production rate all affect equipment selection.
For a closer comparison of the two, read our guide on manual vs automatic spray guns.
Two-component paint systems
Different applications require different two-component mix ratios. Graco ProMix systems are designed for this requirement. Patvin supplies ProMix 2KS and ProMix PD2K systems for two-component coatings, including solvent-borne and waterborne materials. Accurate proportioning matters because an incorrect mix ratio can affect coating performance, finish quality and material consumption.
Sealant and Adhesive Dispensing Equipment
Paint is one part of the fluid application system in the entire manufacturing process. Automotive and industrial products also require the use of sealants, adhesives, foams and other materials. These materials often have a higher viscosity than paint and require different pumps, valves and dispensing equipment.
Controlled dispensing
The equipment must deliver the required amount of material at the required speed and location. For two-component materials, it must also maintain the specified mixing ratio.
The main selection factors include:
- Material viscosity
- Required flow rate
- Bead size
- Mixing ratio
- Material pot life
- Application speed
- Manual or automated application
Patvin provides Graco-based two-component dosing systems for applications that require controlled mixing and dispensing.
Automotive applications
Sealants are used in areas such as joints, seams and NVH applications. The dispensing system needs to maintain a consistent bead while accounting for the material’s properties.
Patvin has also integrated Graco equipment with vision systems for controlled foam dispensing. This has been used for automotive interior applications. For manufacturers looking for a Graco sealant dispensing machine in India, the material and application should determine the system specification.
Industrial Lubrication Systems
Lubrication is such a fundamental part of a well-functioning manufacturing process that a good lubrication system is non-negotiable. It helps to reduce wear on bearings, chains, gears and other moving components.
Manual lubrication can be difficult when equipment has several lubrication points or operates continuously. An automatic system can deliver measured quantities of oil or grease at set intervals. Graco’s lubrication range includes pumps, controllers, injectors and divider valves for industrial applications.
Automatic lubrication
A typical system consists of a pump and reservoir, controller, metering devices, hoses and fittings. Pumps supply the lubricant, whereas the metering devices distribute it in measured quantities to each point. The controller manages the lubrication cycle and can provide system feedback.
Over-lubrication can be as undesirable as under-lubrication. The system should therefore be selected based on the machine, lubricant, and number of lubrication points.
Graco’s range includes automatic grease and oil pumps, injectors, divider valves and controllers.
To see how these systems work in more detail, read our guide to automatic lubrication systems.
Choosing the Right Graco Equipment for Your Industry
The right equipment depends on the job it needs to perform.
Requirement | Equipment to consider | Key factors |
Protective coating | Airless equipment | Coating viscosity, pressure and output |
Fine industrial finish | Air-assisted equipment | Atomisation and finish |
Automated painting | Automatic spray guns | Flow, spray pattern and robot compatibility |
Two-component coating | ProMix system | Mix ratio, material compatibility and pot life |
Automotive sealant | Dispensing system | Viscosity, bead size and application speed |
Adhesive application | Metering and dispensing equipment | Material properties and mixing |
Machine lubrication | Automatic lubrication system | Lubricant type and number of points |
Large lubrication network | Pumps, controllers and divider valves | Pressure, distance and number of outlets |
Start with the material
The coating or fluid should be the first consideration. Water-based paint, solvent-based paint, high-solid coatings, adhesives and greases each have different handling requirements.
Consider production volume
A manual Graco spray painting machine is ideal for smaller operation loads. High-volume production may require automatic guns, circulation systems or robotic application.
Check the entire set-up
Each component of the line needs to work together as a unit. A good gun cannot compensate for an incorrectly sized pump or unstable fluid supply. The same applies to sealant and lubrication systems. Every component should match the material and process.
Plan for maintenance
Manufacturers should also consider filter replacement, pump servicing, seals, valves and other wear parts before selecting equipment.
This becomes particularly important when sourcing Graco spare parts in India for equipment already operating on the production floor.
Why Choose an Authorised Distributor Like Patvin?
Industrial equipment that frequently experiences downtime is one of the biggest profit-burners. Installation and commissioning are also important parts of getting an industrial equipment system operational. Here’s where Patvin offers you end-to-end assistance.
Patvin has been associated with Graco since 1996. The company supplies Graco equipment and also provides installation, system integration, service, AMC, training and spare parts support.
Its Graco portfolio includes spray guns and ProMix systems, while its broader paint-application capabilities span circulation, dosing, robotic application, and other equipment.
For a manufacturer looking for an authorised Graco dealer in India, local technical and service support can also simplify equipment maintenance and troubleshooting.
Patvin provides service support across key manufacturing regions in India, including Mumbai, Pune, Gujarat, Delhi-NCR, Bengaluru, and Chennai.
Graco’s extensive product range and Patvin’s deep technical expertise make it easier for manufacturers to find the right equipment for their specific application needs.
Industries That Rely on Graco Equipment
Automotive
Automotive plants use Graco equipment for paint application, two-component coatings, sealants, NVH materials and lubrication. Patvin’s project experience includes automotive paint application and Graco-based foam dispensing for vehicle interiors.
Metal manufacturing
Metal components often require protective or decorative coatings. For metals, companies can choose airless or air-assisted automatic spray systems as per their coating requirements.
Plastics
Plastic components may require paint, adhesives or other surface treatments. Equipment selection depends on the material and production process, among other factors.
Electronics and general engineering
Production equipment may need controlled dispensing or automatic lubrication. Graco’s industrial lubrication range covers applications across electronics, machinery and other manufacturing environments.
Packaging and processing equipment
Machines with multiple moving parts can benefit from automatic lubrication, particularly where manual access to lubrication points is difficult.
Conclusion
Choosing Graco equipment for manufacturing is about matching the system to the job. The coating, sealant or lubricant, production volume and application method all affect the choice. Maintenance and access to Graco spare parts in India also matter when the equipment is part of a running production line.
Patvin supports manufacturers with Graco airless sprayers, spray painting systems, sealant dispensing equipment and lubrication solutions, along with system integration, installation and after-sales service. With its long association with Graco, Patvin provides both the equipment and the technical support needed to put it to work on the shop floor.
Ready to upgrade your manufacturing process? Schedule a consultation with our team.
FAQs
Graco supplies spray equipment, pumps, proportioning systems, dispensing equipment and automatic lubrication systems for manufacturing applications.
A Graco airless sprayer uses high fluid pressure to atomise and apply coatings. It is commonly used where high material output is required.
It can be suitable for selected automotive and industrial coating applications. The choice depends on the coating, required finish, production rate and application method.
Patvin supplies Graco spray guns and other paint application equipment for industrial applications in India.
A ProMix system accurately proportions and mixes two-component materials before application. Patvin supplies ProMix 2KS and PD2K systems.
Consider the coating type, viscosity, required pressure and flow, spray pattern, production volume, finish requirements and whether the application will be manual, automatic or robotic.
It meters and dispenses sealants, adhesives, foams and other materials. The equipment depends on the material viscosity, mixing requirements, bead size and application speed.
Patvin provides two-component dosing, sealant and fluid application solutions and integrates Graco equipment into industrial applications.
Patvin provides Graco spare parts and service support as part of its industrial equipment offering.
They deliver measured amounts of oil or grease to machinery lubrication points at set intervals. Graco supplies pumps, controllers, injectors and divider valves for these applications.
An established distributor can support equipment selection, installation, commissioning, maintenance and spare parts. Patvin has worked with Graco since 1996 and provides these services in India.
